MARSTON MS 2 K Polymer
MARSTON MS 2 K Polymer is a high-quality MS Polymer-based adhesive.
Resistant to UV, weather, water, damp and chlorine. MD MS 2K Polymer adheres extremely well to many surfaces in most cases without primer. Its temperature resistance range is between -40°C and +90°C. Shore A Hardness 40 DIN 53505. Complete hardening after four hours – conventional MS Polymer (3 mm) in 24 hours. Handling with standard silicone guns.
- Isocyanate and silicone-free
- Can be painted over or coated
- Permanently elastic
- Applicable wet-on-wet
- Resistant to UV radiation, weather, salt water and chlorine
- Excellent adhesion on many surfaces
- Rapid hardening
- Available in white, black, grey and clear
- Temperature-resistant from -40°C to +100°C
(+130°C possible for short periods of 2-3 hours – except clear) - Processing temperature +5°C to +40°C
- Resists some solvents
- Polymerize even in thicker layers
- Low shrinkage
- Very suitable for natural stones
Packaging:
Product | Item No. | Content | Unit | Packaging |
MARSTON MS polymer 2K grey | MMS.2K.G.S400 | 500 g | 6 | double cartridge |
MARSTON MS polymer 2K grey | MMS.2K.G.S300 | 300 g | 12 | cartridge |
MARSTON MS polymer 2K black | MMS.2K.S.S400 | 500 g | 6 | double cartridge |
MARSTON MS polymer 2K black | MMS.2K.S.S300 | 300 g | 12 | cartridge |
MD MS 2K POLYMER MS CLEAR
MD MS 2K Polymer is a high-quality MS Polymer-based adhesive.
Resistant to UV, weather, water, damp and chlorine.
MD MS 2K Polymer adheres extremely well to many surfaces in most cases without primer.
Its temperature resistance range is between -40°C and +100°C.
Shore A Hardness 40 DIN 53505.
Complete hardening, gray after one hour, black after four hours – conventional MS Polymer (3 mm) in 24 hours. Curing time handling after 15 minutes
- Rapid hardening due to 2K system
- Hardening without humidity even with large surfaces
- Isocyanate and silicone-free
- Can be painted over or coated
- Permanently elastic
- Applicable wet-on-wet
Packaging:
|