- Excellent impact, peeling and shear strength
- High resistance to weathering
- Quick-fixing
- Requires short surface preparation
- Temperature resistant up to +120°
The 2-component high performance adhesive MARSTON MEGABOND is the “Fomule 1” under the high performance adhesives. It can be used where conventional adhesives do not achieve the required strenghts.
The MARSTON MEGABOND can be used in all industries
Areas of application:
Bodywork and exterior, model building, window frames, stand construction and interior building, panel bonding, bonding a wide variety of metal and composite parts, pipe connections, mechanical engineering, rubber to composite, signage frame bonding, corrugated sheets, etc.
User instructions:
Clean the glued surfaces thoroughly with a good grease solvent (e.g. Marston Cleaner). Excellent results can be achieved by mechanically roughening the glued surface. (Insert the double cartridge 50 g in the dispensing pistol and lock it in.) Turn the sealing cap, attach the mixing nozzle, and tighten it. Push out the material (with the dispensing pistol 50 g) and dispose of the first 2 g, as this is not yet mixed at 1:1. In warm temperatures the setting time is reduced. Assemble the components and set them. Remove the mixing nozzle and dispose of it. Lock the cap. Store opened cartridges in a cool place and process them as quickly as possible (Can also be carried out without the mixing nozzle).
Initial hardness is achieved after 5-10 minutes. Final hardness is achieved after 12 hours. Do not work at outdoor temperatures below 5°C.