MARSTON TAPES

MARSTON Acryl-Tape is an extremely strong double-sided adhesive tape. For durable adhesion, mounting and securing in interior and exterior areas. Transparent. Attaches securely and durably to almost all smooth surfaces such as metal, ceramic and glazed tiles, plastics, glass and wood. Ideal for mounting brackets, plates, hooks, storage elements, etc. Does not damage surfaces. Moisture-resistant.

Metal, wood, glass, plastic, ceramic, rubber and paper.

Object and application surface must be clean, dry, free of dust and grease. Be sure to avoid contact with the adhesive surface because this will prevent attainment of the full adhesive effect. Apply adhesive tape to the object. Pull off protective paper, apply object precisely to the desired surface and press firmly into place. Once pressed and adhered in place, object positioning cannot be corrected. Maximum adhesion is achieved after approx. 24 hours. Min. application temperature +10 °C. 2 cm long strips of adhesive tape can be loaded with a max. 1.3 kg depending on the application conditions (e.g. the application surface characteristics).

Not suitable for: PE, PP, PTFE (e.g. Teflon®), silicone, paper/vinyl wallpapers, application surfaces with insufficient bearing strength and surfaces with dirt-resistant coatings. Shelf life of 1 year when stored in a dry, clean and well-ventilated place at +10°C to +30°C.

The optimal processing temperature is between 0°C und +30°C.This tape can be applied in wet, non-oily conditions, although dry surfaces conditions are suggested for best performance. Hold the tape in position and apply a complete wrap back onto itself. This initial wrap secures the tape for additional wraps. Maintain a constant stretch as you continue to wrap, making sure each new layer “half laps” onto the previous layer. The overlaps will fuse together. The end of the final wrap must be pressed down onto prior wraps, using less stretch. For pressure applications stretch to the maximum and apply several tight layers. The layers from MD-Silicone Tape begin to vulcanize immediately forming a permanent, cohesive bond within 24 hours. Repositioning is not recommended after 2 minutes of wrapping.